ICT Reactive Sealer
- This sealing process is a way of treating your concrete, not coating your concrete with a thick film. For optimum performance use the “Z” System to produce dense and stain resistant concrete.
- It is recommended tops be properly cured (proper curing techniques), hydrated a minimum of 4 days. Keep surfaces dry 24 hours dry before sealing for best results. Your tops need to be dry enough for maximum penetration and reactivity with the sealer. Surface moisture should be below 3%. Use a Moisture meter to know where you are.
- We recommend that the surface temperature of the surface to be sealed is 100-120 degrees. These reactions are enhanced with heat. Heat opens the surface of the concrete and facilitates the silicate bonding. Heat blankets are highly recommended.
- The more applications you apply, the glossier and more stain resistant it will be. However, with each coat you are increasing the polymer amounts. Increased polymer requires longer cure time to achieve maximum abrasion resistance. We recommend 4 treatments of ICT SealZ for a total of 2 grams per square foot.
Download the ICT Application Guide
Loading... Please wait...
New Products